Sturdy Products Ltd
|Company||Sturdy Products Ltd|
|Address||Blessington Industrial Estate|
|Telephone||00353 45 865044|
|Fax||00353 45 865721|
The Rainwater Harvesting Tank harvests the natural resource of rainwater thus reducing your mains water costs while promoting an eco-friendly solution.
The water collection tank's low profile design along with the integrated columns gives it excellent load bearing strength, which has been tested up to sustain 4 tonnes when empty. Its low profile means that shallow hand dug excavations are suitable. It can also pass through doorways or side passage ways. When situated in one's garden, lawns can be replaced on top of the tank.
The Hydro-Store Harvesting System is ideal for domestic and commercial use where space is at a premium. It is suitable for all applications other than drinking water, such as toilet flushing, dishwashing and washing machines. It can also be used outside for garden watering and car washing.
The Hydro-Store System comes with all the necessary fittings so installation is made easy for your plumbing contractor. Once the system is in place you can start harvesting rain water straight away.
The Mini Rainsaver Water Butt allows for the collection of rainwater from roofs and downpipes. The rainwater can then be used for watering plants and shrubs in your garden. It is manufactured from recycled plastic. The garden water butt is ideal for small gardens and yards.
The water butt consists of a stand, a vessel (water butt), a diverter, a tamper proof lid and a tap. The water barrel sits on the stand which provides a steady base. A tap at the base of the water barrel allows for easy filling of a watering can.
The rainwater butt is designed so that it will not overflow. When the water level reaches the diverter, water will flow straight through the down pipe instead of into the water butt. The Sturdy Down Pipe Filter strains and diverts rainwater into a water butt or rainwater storage tank. Rainwater is channeled from the filter entrance to the sieve cartridge. Dirt is rinsed to the sides, and then into the drain. The cleaned water is led through the cartridge’s outlet channel into storage.
The Sturdy Submersible Pump has a built-in electronic pressure switch and flow sensor. It is equipped with dry run protection and non return valve. The pump is easy to install and use. With a maximum pumping head of 36 meters with 1'' pipe it is suitable for most installations.
The Sturdy Pressure Vessel is designed to keep the system pressurised and help prevent drips.
The Sturdy External Float Valve is designed to connect to the mains water supply above your attic tank. It provides a back up supply of water in the event of demand exceeding rainfall. Its design prevents the possibility of any back flow of rainwater into the mains system. Under normal conditions rainwater will fill the tank. If the rainwater level drops below a pre-set level, the Float Valve will open to maintain the water level using the mains water supply.
|Products and Services|
|Sturdy Products Ltd is a SelfBuild supplier|
|Hazardous Material Storage|
|Sustainable Drainage Systems (SUDS)|
|Trolley, Truck and Barrow Makers|
|Wastewater Treatment Equipment|
|England - East Midlands|
|England - Eastern|
|England - London|
|England - Merseyside|
|England - North East|
|England - North West|
|England - South East|
|England - South West|
|England - West Midlands|
|England - Yorkshire The Humber|
Flagship Media Group Ltd
Unit C3, 6 Westbank Drive, Belfast,
BT3 9LA, Northern Ireland
Tel (+44) 28 9031 9008
Contact : Click here
keycons003 / keycons003xLIS / keycons003x18 28/04/2015 06:15:08 / A1 / B2 / 0.046875, 184.108.40.206 / BOT1
Water Harvesting, Rain Harvesting, Rainwater Harvesting, Rain Water Harvesting, Rain Water, Rainwater Tank, Rainwater Collection, Rainwater Harvesting Systems, Rain Harvesting System, Rainwater Harvesting System.
Water Harvesting, Rain Harvesting, Rainwater Harvesting, Rain Water Harvesting, Rain Water, Rainwater Tank, Rainwater Collection, Rainwater Harvesting Systems, Rain Harvesting System, Rainwater Harvesting System