Ireland
UK
Scotland
London
Direct Cutting Limited
Address
Unit 215 - 217 Sams Lane
West Bromwich
B70 7EX
About Direct Cutting Limited
Direct Cutting is a UK-based online supplier of Unistrut-compatible strut channel, channel brackets, threaded rod, nuts and bolts, cable management systems, and stainless steel fixings - all available to order online with no minimum order requirement.
We're based at our depot in West Bromwich, West Midlands, where we stock and dispatch orders across the UK. Whether you're a sole trader, electrical contractor, M&E engineer, facilities manager, or a large construction firm, we're set up to serve you quickly and without fuss.
Why We Started
The strut channel and cable support market in the UK has long been dominated by trade-only distributors with opaque pricing, long lead times, and high minimum order quantities. For smaller contractors, one-off projects, or anyone who just needed a few metres cut to a specific length, the options were limited and expensive.
We launched Direct Cutting to change that. Our entire model is built around being accessible, transparent, and fast - with competitive prices that are visible to everyone, not just large account holders.
What Makes Us Different
Cut to your required length - Our strut channel and threaded rod can be cut to your exact specifications, reducing waste and saving you time on site.
No minimum order - Order what you need, when you need it. One bracket or one hundred - we treat every order the same.
Unistrut compatible - Our products are fully compatible with Unistrut systems, giving you confidence in fit and performance.
Fast UK-wide delivery - We dispatch promptly from our West Midlands depot to anywhere in the UK.
Real people, real service - You can reach us by phone or email during business hours. We're a small, hands-on team and we take customer service seriously.
Strut Channel
All our Strut Channel is Unistrut compatible and all lengths conform to BS6946 1988 standards.
Available as plain or slotted and 3 & 6 meter lengths with a Pre-galvanised finish.
Channel Bracketry & Fixings
Channel support systems are made so versatile thanks to the vast array of bracketry and accessories available.
Splice, T, and V plates, and flat brackets in various configurations allow you to create an unlimited amount of joints and connections between sections of strut channel.
Joiners allow you to extend the length of struts, while there is a range of heavy duty galvanised angle brackets, fixed angle brackets from acute to obtuse angles and if you need more flexibility there are even hinged angle brackets.
Z brackets, U brackets, bracing brackets and cantilever arms allow for further configurations, while base plates and beam clamps can give you additional options for mounting your systems.
Threaded Rod
A range of strong threaded rods, ideal for those situations where heavier applications that require longer lengths are needed. Available in various lengths and sizes for any job and configuration type.
Nuts & Bolts
Cable Management
Our cable management products offer a range of benefits such as:-
Peak Performance: Cable management systems are designed to facilitate maximum airflow, minimizing the risk of overheating and ensuring consistent, optimal performance of your cables at all times.
Customization Made Easy: The modular design of our cable management products enables seamless integration and adaptability, allowing for hassle-free installation, modification, and expansion in line with your evolving needs.
Safety First: By effectively organizing cables and keeping them securely off the ground, our cable management solutions significantly reduce the risk of accidents and injuries, creating a safer working environment for you and your team.
Budget-Friendly Options: Offering high-quality cable management solutions at competitive prices, our collection delivers outstanding value without compromising on performance or durability.
Stainless Steel
Unmatched Durability: Stainless steel strut channels and accessories offer exceptional strength and longevity, ensuring your installations withstand the test of time.
Superior Corrosion Resistance: Engineered to resist rust and corrosion, these components maintain their integrity even in the harshest environments, reducing maintenance costs.
Aesthetic Excellence: With a sleek, professional appearance, stainless steel enhances the visual appeal of your projects, reflecting a commitment to quality and precision.
Gallery
News
This guide provides insights into choosing between plain oiled and galvanised strut channels for construction projects, ensuring the right material is used for the right environment to avoid costly mistakes over time.
Key Takeaways:
Plain Oiled: Ideal for indoor fabrication work, welding, and powder coating. It’s economical but requires post-fabrication finishing to prevent rust.
Galvanised Options: Pre-galvanised is suitable for dry, indoor environments, while hot-dip galvanised offers superior protection for outdoor and high-humidity conditions.
Prioritisation Framework: Outlines the best use cases for each type of finish, highlighting their corrosion risks and relative costs.
Plain Oiled Strut Channel: Explained as plain carbon steel with a mill oil finish that inhibits rust only temporarily. It's versatile for custom fabrication but unsuitable for environments with moisture unless further coated.
Galvanised Strut Channel:
Pre-Galvanised (PG): Coated before shaping, cost-effective for dry environments but leaves cut edges vulnerable.
Hot-Dip Galvanised (HDG): Offers full coverage and superior protection, suitable for harsh outdoor conditions.
Real-World Applications:
Indoor, Dry Environments: Both plain oiled and pre-galvanised can suffice with appropriate finishing.
High-Humidity & Outdoor Use: Hot-dip galvanised is recommended for its durability.
Coastal & Marine Settings: Stainless steel is preferred over galvanised for extreme conditions.
Cutting and Welding Considerations:
Plain oiled is better for welding due to the absence of toxic zinc fumes, but galvanised requires careful handling and post-cutting treatment.
Common Mistakes to Avoid:
Using plain oiled outdoors without finishing.
Choosing pre-galvanised instead of HDG for humid or outdoor conditions.
Failing to touch up cut edges of galvanised strut.
FAQs:
Advises on painting galvanised strut, confirms that plain oiled, self-colour, and black steel are synonymous, and discusses the longevity of hot-dip galvanised strut.
In conclusion, the article stresses the importance of selecting the appropriate strut channel finish based on environmental exposure to ensure long-term performance and cost-effectiveness.
Key Takeaways:
Plain Oiled: Ideal for indoor fabrication work, welding, and powder coating. It’s economical but requires post-fabrication finishing to prevent rust.
Galvanised Options: Pre-galvanised is suitable for dry, indoor environments, while hot-dip galvanised offers superior protection for outdoor and high-humidity conditions.
Prioritisation Framework: Outlines the best use cases for each type of finish, highlighting their corrosion risks and relative costs.
Plain Oiled Strut Channel: Explained as plain carbon steel with a mill oil finish that inhibits rust only temporarily. It's versatile for custom fabrication but unsuitable for environments with moisture unless further coated.
Galvanised Strut Channel:
Pre-Galvanised (PG): Coated before shaping, cost-effective for dry environments but leaves cut edges vulnerable.
Hot-Dip Galvanised (HDG): Offers full coverage and superior protection, suitable for harsh outdoor conditions.
Real-World Applications:
Indoor, Dry Environments: Both plain oiled and pre-galvanised can suffice with appropriate finishing.
High-Humidity & Outdoor Use: Hot-dip galvanised is recommended for its durability.
Coastal & Marine Settings: Stainless steel is preferred over galvanised for extreme conditions.
Cutting and Welding Considerations:
Plain oiled is better for welding due to the absence of toxic zinc fumes, but galvanised requires careful handling and post-cutting treatment.
Common Mistakes to Avoid:
Using plain oiled outdoors without finishing.
Choosing pre-galvanised instead of HDG for humid or outdoor conditions.
Failing to touch up cut edges of galvanised strut.
FAQs:
Advises on painting galvanised strut, confirms that plain oiled, self-colour, and black steel are synonymous, and discusses the longevity of hot-dip galvanised strut.
In conclusion, the article stresses the importance of selecting the appropriate strut channel finish based on environmental exposure to ensure long-term performance and cost-effectiveness.
Location Map
Direct Cutting Limited Serves The Following Areas
Direct Cutting Limited Serves The Following Counties
Direct Cutting Limited Serves The Following Towns
